Natural Hazards - This work attempted to reveal the geometric and kinematic characteristics of a loess landslide that occurred at Zaoling, southern Shanxi Province, China, on March 15, 2019. Based... 相似文献
Based on the three-dimensional digital image correlation (3D-DIC) technique, the stereovision system has been applied to the improved triaxial apparatus to obtain 3D full-field deformation of the specimen during triaxial testing. Through the calibration process, the 3D-DIC technique can obtain the accurate specimen’s spatial displacement deformation. Meanwhile, a subpixel edge detection algorithm has been combined with 3D-DIC technique to calculate the radial strain and the volume strain of the specimen directly. Furthermore, a series of consolidated drained and undrained triaxial tests were carried out on Hainan (China) sand specimens and measured by the conventional and the image measurement methods. Compared to the results measured by the conventional method, the image measurement technique can obtain the more experimental data, such as the 3D displacement field of the whole specimen, the local strain distribution, and so on. The measurement results also show the conventional method would be disturbed by the end constraints in triaxial tests so that the strength of the soil would be overestimated. Meanwhile, the middle of the specimen would be selected to calculate the stress–strain relationship without the influence of the end constraints in the proposed method. Based on the image measurement results, the proposed method has the potential to be used in geotechnical tests for exploring the soil’s progressive failure behaviors, inhomogeneous deformation and mechanical characteristics.
Some of the tridymite in the monomict Northwest Africa (NWA) 11591 eucrite are found to have sulfide‐rich replacement textures (SRTs) to varying degrees. The SRTs of tridymite in NWA 11591 are characterized by the distribution of loose porous regions with aggregates of quartz and minor troilite grains along the rims and fractures of the tridymite, and we propose a new mechanism for the origin of this texture. According to the volume and density conversion relationship, the quartz in the SRT of tridymite with a hackle fracture pattern was transformed from tridymite. We suggest that the primary tridymite grains are affected by the S‐rich vapors along the rims and fractures, leading to the transformation of tridymite into quartz. In addition, the S‐rich vapors reacted with Fe2+, which was transported from the relict tridymite and/or the adjacent Fe‐rich minerals, and/or the S‐rich vapors react with the exotic metallic Fe to form troilite grains. The sulfurization in NWA 11591 most likely occurred during the prolonged subsolidus thermal metamorphism in the shallow crust of Vesta and might be an open, relatively high temperature (>800 °C) process. Sulfur would be an important component of the metasomatic fluid on Vesta. 相似文献
Acta Geotechnica - This study develops a micro-mechanics-based elastoplastic damage model within the framework of irreversible thermodynamics. In the model, damage is related to growth of... 相似文献
The effect of variable rock mass properties on pile-rock interaction poses a great challenge to the design of stabilizing piles and numerical analysis of pile-rock interaction. The paper presents a novel method to estimate the properties of weathered bedrock, which can be applied to routine design of landslide-stabilizing piles for collivial landslides. The Ercengyan landslide located in the Three Gorges Reservoir, China, is the area of interest for this study. A geological investigation and triaxial tests were conducted to estimate the basic parameters, including Geological Strength Index(GSI), uniaxial compressive strength σ_(ci) and Hoek-Brown constant m_i of intact bedrock in the study area. Hoek-Brown criterion was used to estimate mechanical properties of the weathered rock, including elastic modulus E_m, cohesion c, friction angle Φ, and normal ultimate lateral resistance p_(max). A parametric study was performed to evaluate the effect of parameterizations of GSI, σ_(ci) and m_i on the bedrock properties and p-y curves. The estimated rock mass properties were used with PLAXIS 2D software to simulate pile-rock interaction. Effect of GSI on stress at the pile-rock interface and in the rock, pile bending moment, pile shear force, and p-y curve were analysed. 相似文献
With accelerating urbanization in China, urban waterlogging has had a serious impact on urban sustainable development and citizen welfare. Simple urban rainstorm intensity formulas with a monotonous frequency distribution type cannot meet the practical needs of urban drainage planning and design. This study focuses on the development of urban rainstorm intensity formulas based on spatial diversity in China. Using the annual maximum sampling method, rainstorm data of 607 cities throughout China were collected into a database, with a total of 24,933 rainfall samples (annual observations) under various specified precipitation durations. The database was used to verify that integrating the Pearson III and Gumbel distributions would constitute an optimal theoretical distribution type, owing to its small error and increased fitting precision. Modification and coordination of four important parameters in the rainstorm intensity formula were done using a digital elevation model, which improved the accuracy of the formula. In addition, precipitation distributions in China were treated from the perspective of topographic features to validate the calculations from up-to-date formulas. Accuracy assessment was accomplished using a national code (GB-50014-2006), GIS-based isograms, and authoritative results from the Hydrological Bureau of the Ministry of Water Resources. This work provides a comprehensive foundation for the establishment of an up-to-date rainstorm intensity formula for China, which can be used widely in different cities. 相似文献
Based on the analyses of mineralogical compositions by X-ray diffraction and microstructure by optical microscopy, the Young’ modulus and hardness of a claystone were characterized by the nano-indentation technique and homogenization method. Three distinct microstructural zones are identified in the claystone: clay matrix, a composite matrix of clay and small mineral grains and imbedded quartz grains. The elastic modulus and hardness of different zones were determined by nano-indentation testing. Based on the statistical analysis of nano-indentation results, the spatial mappings and frequency distributions of elastic modulus and hardness of the different zones were obtained. The elastic moduli of main constituent phases of the claystone are then estimated from the nano-indentation tests. These values were further used for the determination of the macroscopic elastic modulus of the claystone using two different homogenization schemes: the dilute scheme and Mori–Tanaka scheme. The predicted values by the homogenization schemes are compared with experimental data obtained from conventional uniaxial compression tests. 相似文献